Working principle of hydrogen peroxide sterilizer

Working principle of hydrogen peroxide sterilizer

Good sterilization effect, short operation time, no residue of Sanofi S25 antiviral broad-spectrum sporicidal agent, no corrosion in the environment, low cost of use, and complete validation support.

1Working principle of hydrogen peroxide sterilizer
The dry mist sterilizer achieves spatial sterilization by spreading the sterilizing agent dry mist to the area that needs to be sterilized. When the average diameter of droplets is less than 10 microns, the sprayed mist can be referred to as "dry"; Dry droplets will not settle and move irregularly, and they will not aggregate to produce large droplets; Dry droplets will bounce back upon surface contact without breaking, thus wetting the surface; Therefore, the properties of dry mist gas enable the diffusion of sterilizing agents in difficult to reach areas, thereby achieving better spatial sterilization effects.

2、 System Description:
Key accessories (nozzle, pressure reducing valve, pressure gauge, safety valve) are optional *;
The main material is made of 316L stainless steel, with internal mirror polished Ra<0.3um, and proof of stainless steel material is provided.
Each system is equipped with 1-4 nozzles, with the option of a 360 degree rotating nozzle; Suitable for spaces of 20-1000 cubic meters;
The equipment does not require electric drive, only compressed air or nitrogen is needed; Mobile device design, detachable, convenient for storage;
The equipment is easy to clean and has no hygiene blind spots. The overall sterilization process takes about 2-5 hours

3、 Applicable places
Suitable for places that require regular disinfection and sterilization, such as biosafety laboratories, animal centers, pharmaceutical GMP workshops, infectious disease wards, etc

4、 The sterilization effect of the space dry mist sterilizer can be verified:
*In accordance with the regulations of the United States Pharmacopeia (USP), Bacillus subtilis was used as the challenge test bacterium to achieve a killing rate of 103-106, which is a decrease of 3-6 fold units. This can prove the system's ability to kill various microorganisms in the process of space sterilization and purification.

5、 Introduction to sporicidal agents:
Sanofi S25 is from Switzerland, and its raw materials, equipment, and products comply with ISO9001 and ISO9002 standards. It is registered with the US Environmental Protection Agency (EPA)
German TUV (third-party testing and certification organization) certification
UL (Underwriters Laboratories) certification
The efficacy of CE (European Union) certified products has been tested and verified by over 270 institutions and research institutes (as of November 2010)