YL-HV1000 headlight push-pull force testing machine

NegotiableUpdate on 03/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YL-HV1000 headlight push-pull force testing machine

Product Details

Job Description:

The sample is fixed on the workbench using fixtures and fixtures. The distance between the front and back can be adjusted by using handle wheel 1, with a distance of 200mm each. The distance between the front and back can be adjusted by using handle wheel 2, with a height of 150mm. The sample is adjusted to the corresponding position using handle wheels 1 and 2. Finally, the computer sets the test method to apply pressure to the sample using the machine loading head, and various test data and curves are obtained.

Specification parameters:

Model number	YL-HV1000
Machine size (mm)	Approximately 1800 × 900 × 700 (W × D × H)
Net weight of the machine	About 150KG
Effective itinerary	700mm
Capacity selection	10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 50KN (optional dual capacity configuration)
Control method	Full computer control mode, powerful software functions
Unit of Strength	N. KN, gf, kgf, lbf, kP, tf (SI), tf (long), etc
Length unit	Mm, cm, Inch, m, km, um, etc
Stress unit	Pa, Kpa, Mpa, Gpa, KN/㎡, N/㎡, etc
Power resolution	1/500,000
Machine precision	Better than level 0.5
Travel resolution	1/500,000mm
Collection rate	1000 times/s
Speed range	0.001~500mm/min (customizable)
Workbench size	800x800mm
Shutdown mode	Overload stop, emergency stop button, automatic stop due to specimen damage, automatic stop due to upper and lower limit settings
Machine power	Panasonic servo motor drive
Power	400W
Power supply	220V 50~60HZ
Machine equipment	1 USB cable and 1 software