- Phone
-
Address
Room 622, Building A, Beichen Xianglu Yating, No. 19 Xianlongshan Road, Haidian District, Beijing
Product Categories
Beijing Zhongyi Kexin Technology Co., Ltd
ZYET-5100 Portable Smoke Analyzer
NegotiableUpdate on 05/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This instrument uses a built-in air pump to suck in smoke through a sampling probe equipped with pressure and temperature sensors. It then sequentially measures the ambient temperature, smoke temperature, as well as the content of O2, NO, NO2, SO2, CO2, CO, HC, H2S and other components through various optional electrochemical sensors or non dispersive infrared detectors.
Product Details
Application scope
Used for exhaust detection of various boilers, industrial furnaces, and automobile exhaust in power, smelting, environmental protection, safety supervision, scientific research and other departments, as well as for environmental gas monitoring and analysis, desulfurization and denitrification project acceptance, and waste incineration emission detection.
Used for exhaust detection of various boilers, industrial furnaces, and automobile exhaust in power, smelting, environmental protection, safety supervision, scientific research and other departments, as well as for environmental gas monitoring and analysis, desulfurization and denitrification project acceptance, and waste incineration emission detection.
Technical Parameter
| Project Bar | Explanation column | |||||
| Measurement parameters | O2 | NO | NO2 | SO2 | CO | CO2 |
| measuring principle | electrochemistry | electrochemistry | electrochemistry | electrochemistry | electrochemistry |
Non dispersive infraredNDIR
|
| measuring range | 0~20.9 Vol% | 0~1000 ppm | 0~100 ppm | 0~2000 ppm | 0~2000 ppm | 0~20 Vol% |
| resolution | 0.1 Vol% | 1 ppm | 1 ppm | 1 ppm | 1 ppm | 0.01 Vol% |
| accuracy | ±0.2% | ±3% | ±3% | ±3% | ±3% | ±3% |
| Project Bar | Explanation column | ||||
| Measurement parameters |
HChydrocarbons
| ambient temperature | Gas temperature | Flue pressure | differential pressure |
| measuring principle |
Non dispersive infraredNDIR
| platinum |
Ktypethermocouple
| semiconductor | semiconductor |
| measuring range | 0~30000 ppm |
-20℃/200℃
|
-20°C/400°C
| -30/+50 hPa | -30~+30 hPa |
| resolution | 2 ppm |
0.5℃
|
1℃
| 0.001 hPa | 0.001 hPa |
| accuracy | ±3% | ±1% | ±2% | ±2% | ±2% |
Instrument characteristics
◆Large capacity storage can store500Group data for easy storage and retrieval of measurement data
◆RS232Communication port, capable of establishing an external connection for the instrument, enabling the upload and archiving of measurement data
◆Built in printer, real-time printing output of actual detected content
◆Strong scalability, can accommodate up to six sensors
◆Modular circuit design, the system can automatically identify the type of sensor
◆Users can calibrate the instrument as needed at any time, making it easy to use
◆Real time air excess coefficient, while calculating converted concentration
◆Optional pitot tube, capable of automatically calculating smoke flow rate
◆Calculate actual flue gas emissions based on flue gas flow rate
◆Preprocessing optional accessories can make measurement results more accurate
◆Built in battery, suitable for situations without AC power supply
◆Standard sampling probe, including temperature sensor and simple processing device（probe length0.3rice, hose length3rice）
◆Powerful software features allow users to input excess oxygen coefficient and fuel coefficient by themselves
◆RS232Communication port, capable of establishing an external connection for the instrument, enabling the upload and archiving of measurement data
◆Built in printer, real-time printing output of actual detected content
◆Strong scalability, can accommodate up to six sensors
◆Modular circuit design, the system can automatically identify the type of sensor
◆Users can calibrate the instrument as needed at any time, making it easy to use
◆Real time air excess coefficient, while calculating converted concentration
◆Optional pitot tube, capable of automatically calculating smoke flow rate
◆Calculate actual flue gas emissions based on flue gas flow rate
◆Preprocessing optional accessories can make measurement results more accurate
◆Built in battery, suitable for situations without AC power supply
◆Standard sampling probe, including temperature sensor and simple processing device（probe length0.3rice, hose length3rice）
◆Powerful software features allow users to input excess oxygen coefficient and fuel coefficient by themselves
Options
◆pretreatment systemZYET-3900Including heating sampling probe, heat tracing hose, and Peltier condenser（Only when powered by AC power supply use），ZYET-3900Portable smoke pre processor, including pre processor30cmSampling needle and3riceHeat tracing hose. Used for flue gas pretreatment, rapid condensation effectively removes moisture from flue gas to obtain accurate measurement data. Sampling needle heating temperature80CelsiusThe heating temperature of the heat tracing hose is the highest200CelsiusCan cooperateZYET-5100Can also be used in conjunction with instruments from other manufacturers
◆Sampling probes and heat tracing hoses can be customized according to requirements
◆CO2、SO2、NO、NO2、H2SWaiting for chemical sensors and non dispersive red sensors（used forCO、CO2、HCanalysis）
◆Differential pressure sensor and pitot tube
◆pretreatment systemZYET-3900Including heating sampling probe, heat tracing hose, and Peltier condenser（Only when powered by AC power supply use），ZYET-3900Portable smoke pre processor, including pre processor30cmSampling needle and3riceHeat tracing hose. Used for flue gas pretreatment, rapid condensation effectively removes moisture from flue gas to obtain accurate measurement data. Sampling needle heating temperature80CelsiusThe heating temperature of the heat tracing hose is the highest200CelsiusCan cooperateZYET-5100Can also be used in conjunction with instruments from other manufacturers
◆Sampling probes and heat tracing hoses can be customized according to requirements
◆CO2、SO2、NO、NO2、H2SWaiting for chemical sensors and non dispersive red sensors（used forCO、CO2、HCanalysis）
◆Differential pressure sensor and pitot tube
Product specifications
◆Communication port:RS232
◆Power: less than100W
◆Size:445×205×320mm(Facing the width of the instrument)×Depth before and after the instrument×High)
◆Weight:10Kg(varies depending on different configurations)
◆Power: less than100W
◆Size:445×205×320mm(Facing the width of the instrument)×Depth before and after the instrument×High)
◆Weight:10Kg(varies depending on different configurations)
work environment
◆ambient temperature-10℃~50℃
◆Relative humidity not exceeding95%RH
◆Good ventilation environment and no leakage of tested smoke
◆220VACAC power supply or built-in battery provides power for operation
◆Relative humidity not exceeding95%RH
◆Good ventilation environment and no leakage of tested smoke
◆220VACAC power supply or built-in battery provides power for operation
Similar Product Recommend
