Zhengzhou Pingyuan New Area 300 Barrel Water Filling Line Equipment

The Henan Youbang bottled water filling line mainly includes: purified water production equipment, 5-gallon or 3-gallon large barrel filling machines, brush bucket cap removal machines, manual or automatic film sealing machines, bucket cap coding machines. The large barrel filling line can also add automatic cap removal machines, automatic internal and external washing bucket machines, automatic bucket loading machines, automatic sealing machines, and automatic bucket lifting machines.

1、 Fully automatic large barrel filling machine:

The fully automatic large barrel filling machine adopts PLC program for fully automatic control, and its working process is as follows:

Close the air leakage protection switch and turn on the emergency stop switch. The power indicator light on the panel lights up, indicating that the power supply of the machine is connected and the PLC is powered on. Place the "selector switch" in the "automatic" position, press the "start switch" button once, control the AC contactor of the transmission motor to close, and the machine starts working. When an empty bucket is inserted into the empty bucket position and the empty bucket detection induction switch is pressed (the flushing signal is sent out by the empty bucket detection induction switch in the washing bucket inlet area), the washing bucket drive motor starts running and carries the empty bucket into each washing and disinfection station through the chain and bucket holder. The flushing bucket passes through six stations: station one uses drip drying, while stations two, three, and four use washing and disinfection solutions for flushing; station five uses clean water for flushing, and station six uses pure water for flushing. When the transmission motor runs with an empty bucket and enters the positioning induction area with the induction piece on the chain, the positioning induction switch sends a signal to stop the transmission motor, and the flushing bucket water pump starts to perform corresponding flushing and disinfection work (the flushing time is controlled by the PLC program); After flushing, the cleaned empty bucket is conveyed by the bucket washing transmission mechanism and falls onto the bucket pushing rack. The bucket pushing cylinder works to push the empty bucket to the filling position, aligning the filling nozzle with the bucket mouth. After the pure water flushing is completed, the filling water pump starts filling. (The filling time is adjusted by the user according to their needs). When the filling is full, the PLC sends a control signal, the filling solenoid valve closes, and the water filling stops. After the filling is completed, the next water bucket is used to send the filled water bucket to the capping area for capping, and then to the capping area. The capping cylinder drives the capping device to press the bucket lid tightly. At this point, a washing and irrigation cycle is completed.

Attention: Only empty buckets inserted before the washing bucket drive motor runs are valid. The empty bucket inserted into the washing and disinfection station after the operation of the washing bucket transmission motor is treated as no bucket by the microcomputer control system. At the same time, the machine will not wash or fill. If the machine continues to operate, it may cause equipment damage.

Features of fully automatic large barrel filling machine:

1. Suitable for bucket type: specifically designed for producing 3-gallon and 5-gallon bottled drinking water.

2. Fully functional: The whole machine integrates flushing, filling, and sealing functions.

3. Application scope: It is an ideal equipment for the production of mineral water, distilled water, and purified water

4. The whole machine is made of high-quality stainless steel, which is corrosion-resistant and easy to clean.

The main features of reverse osmosis purified water production equipment are:

1. The purified water equipment adopts reverse osmosis membrane, which has good desalination effect, long service life, and low operating cost.

2. Adopting a fully automated preprocessing system to achieve unmanned operation.

3. Adopting the Southern Special Pump Industry booster pump, the effect is good, the noise is low, and it is stable and reliable.

4. Online water quality monitoring and control of purified water production equipment, real-time monitoring of water quality changes, ensuring water quality safety.

5. Fully automatic electronic control program, with optional touch screen operation, easy to use.