The traditional Chinese medicine pill making machine can produce honey pills, concentrated pills, water honey pills, water pills, pill shaped foods, as well as coating and drying. Make the produced pills uniform and aesthetically pleasing. Specially suitable for small pharmaceutical factories, trial production rooms of large and medium-sized pharmaceutical factories, research institutes of traditional Chinese medicine, hospitals, private clinics, Chinese medicine stores, on-site processing and sales points of precious tonics, and the whole machine is made of stainless steel and meets GMP standards. However, in reality, we also need to clean the pill making machine in a timely manner after use, which can not only extend the service life of the pill making machine, but also ensure that the next pill making is cleaner and more hygienic.

1. During operation, there should be no other unrelated items on the workbench. The pill making machine should be placed on a flat table. After confirming the power supply voltage, the power supply should be close to the table, and the power socket should have a reliable grounding wire. It is strictly prohibited to pull the power cord forcefully to prevent the pill making machine from being overturned, damaged, and other accidents from occurring;

2. After use, remove the hexagonal socket screw and open the upper and lower parts with the roller as the boundary. Remove the roller and clean it with medical alcohol. Alternatively, different specifications of molds can be replaced according to the needs of pill making,.

3. When scrubbing with alcohol, replacing the pill making roller and the strip release clutch roller, the main power must be cut off and the power plug must be unplugged to avoid personal accidents.

4. During startup use, it is strictly prohibited to touch the pill making roller and the strip release clutch roller with hands, brushes, or other tools to avoid finger injuries. It is also strictly prohibited to process pills with electricity under the protection of the upper cover shell or gearbox cover to avoid unnecessary personal accidents.

5. If the power cord is damaged (such as exposed bare wire, etc.), the power cord must be replaced. If the switch or socket fails, it must be stopped from use. It is strictly prohibited to change the circuit and continue using it. It is necessary to promptly replace the same specification of switch or socket to avoid mechanical or personal accidents.

6. Not cleaning and maintaining it after use will reduce its performance and affect all aspects. Therefore, simply performing maintenance after use can avoid the occurrence of malfunctions.