The use and maintenance of automatic filling machines,Firstly, adjust the filling accuracy of the automatic filling machine

The generation of filling errors is mainly determined by the filling volume, filling speed, and the opening and closing speed of the upper and lower valves. The opening and closing speed of the upper and lower valves is related to the viscosity of the product. The higher the viscosity, the slower the valve opening and closing speed.

2. The adjustment of the spring pressure of the valve should be determined through trial filling measurement and the experience of the operator.

3. The opening and closing speed of the thickening valve mainly adjusts the spring pressure of the valve. As the spring pressure increases, the opening and closing speed of the valve accelerates.

Secondly, for the safe use of automatic filling machines, to ensure production safety, the following precautions should be taken:

1. This machine is set without power supply, and the normal gas source is 4-6kg.

When disassembling and washing this machine, do not rinse the body directly with water.

If there is overflow from the injection nozzle, press the safety emergency stop switch to ensure the workshop is tidy.

4. The circuit of this machine is simple and cannot be plugged in or unplugged arbitrarily.

When improper operation causes the cylinder top to be unable to retract, please press this button to reset it.

Maintenance of automatic filling machine equipment

1. The body of the automatic filling machine is made of stainless copper shell. Do not use sharp or hard tools to scrape its surface.

2. When disassembling and washing the piston, the fixing screws on it should be removed at the same time to avoid affecting the process requirements of another one.

Before cleaning the piston filling machine, the remaining products inside should be cleaned thoroughly, and then the material bucket should be filled with soft cleaning solution. Our company recommends using warm water. If needed, soap water, alcohol, or other cleaning solutions can be used.