The constant temperature oscillation incubator is a specialized constant temperature cultivation device for the cultivation and breeding experiments of molds and microorganisms. It is particularly suitable for scientific research and production in fields such as biotechnology, chemical engineering, medical research, agricultural and forestry science, aquaculture, and animal husbandry.Constant temperature oscillation incubatorThe maintenance of the equipment is very important for its normal use. Developing good usage and maintenance habits plays an important role in extending the service life of the equipment.
Below, the editor will briefly introduce what precautions we need to pay attention to in the daily operation of the constant temperature oscillation incubator? as shown below
When replacing the fuse of the constant temperature oscillation incubator, the plug should be unplugged from the socket.
2. Read all user manuals.
3. The entire machine is strictly prohibited from being used in an environment with direct sunlight.
4. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine and have good grounding measures.
5. When using a constant temperature oscillation incubator in an environment with children, close attention should be paid.
6. During the use of the constant temperature oscillation incubator, it is strictly prohibited to insert fingers into the gaps between the up and down movements.
Using at medium speed within the speed range can extend the lifespan of the instrument.
When using a constant temperature oscillation incubator for refrigeration, the ambient temperature should be below 32 ℃. When using refrigeration with an ambient temperature above 25 ℃, the number of door openings should be minimized as much as possible.
9. The heated object should be cooled at ambient temperature before being placed in the machine. It is strictly prohibited to directly place the heated object in the refrigeration incubator to prevent danger.
When cleaning the machine, the power should be unplugged first.
After a malfunction of wires or electrical equipment, it should be repaired by professionals. Using accessories not recommended by the manufacturer may cause certain quality issues.
When placing items on the workbench, an appropriate amount of space should be maintained between each test bottle to facilitate the circulation of cold and hot air convection.
13. The bearings of the transmission part have been filled with an appropriate amount of lubricating grease (No. 1 calcium nano base) before leaving the factory. During continuous operation of the instrument, lubricating grease should be added every six months, with a filling amount of about one-third of the bearing space.
14. The instrument should be placed on a sturdy workbench, with a clean and tidy environment and good ventilation.
15. The compressor of the constant temperature oscillation incubator should avoid continuous starting.
During continuous operation, the instrument should undergo regular inspections every three months; Check the fuse, control components and fastening screws, and whether there are water droplets, dirt, etc. falling onto the motor and control components.
Using at medium speed within the speed range can extend the lifespan of the instrument.
18. Regular use of the instrument and natural wear and tear are normal phenomena. After one year of use, if abnormal noise is found in the motor or compressor of the instrument; We will continue to provide high-quality services and assist in handling faults such as bearing wear in the transmission part, loose or cracked belts, and failure of electronic control components.
When placing items on the workbench, an appropriate amount of spacing should be maintained between each test bottle to facilitate the circulation of cold and hot air convection.
20. Proper use and maintenance of instruments can prolong their service life by keeping them in good working condition.