Constant Temperature ShakerBrushless motor, LCD display, also known as air bath constant temperature oscillator, is a biochemical instrument that combines a temperature controlled constant temperature incubator and oscillator. It uses a large-sized glass cover and is driven by a brushless or brushed motor. It is a laboratory equipment for precision cultivation and preparation in scientific research, education, and production departments such as plants, biology, microbiology, genetics, viruses, environmental protection, and medicine.

Below, the editor will briefly introduce the main product features and common troubleshooting of the constant temperature shaker, as follows:

1. Equipped with power-off recovery function, the device can automatically resume operation according to the original set program after the external power supply suddenly loses power and resumes power.

2. Overtemperature sound and light alarm function, automatically cutting off power supply for motor overheating, temperature loss control, and abnormal overtemperature instruments.

3. The constant temperature shaker is equipped with a single axis drive balancing device technology, ensuring extremely low energy consumption and noise.

4. Design of communication induction long-life motor, wide speed regulation, constant torque, constant speed, brushless, maintenance free.

5. The oscillation frequency can be widely extended to 30-300rpm.

6. Streamlined luxury design, ABS special engineering plastic box, large screen tempered hot bending glass window.

7. The acceleration control circuit ensures that the shaker starts slowly and accelerates smoothly, ensuring the safety of the experimental samples.

8. Run parameter memory function to avoid tedious operations.

Common faults and solutions of constant temperature shaker

1. The temperature fluctuation of the shaker is large, and the cooling mode is set incorrectly. Please reset it according to the user manual.

2. The instrument is not running, the panel has no display, the external power supply is not connected or the fuse is burnt, whether the instrument power plug is plugged in properly, whether the power socket has power, and whether the power switch is turned on.

3. The instrument has loud noise and is placed unevenly; Adjust the instrument with your left foot to make it land smoothly. Loosen the porous tray and tighten the fastening nuts at the four corners of the tray. Remove the flask clamp and use the randomly attached tool to tighten the flask clamp nuts

4. The measured temperature is too high and often enters the over temperature alarm state. If the starting temperature is too high, open the ventilation hole on the back of the instrument or activate the cooling button

5. The constant temperature shaker is running, but there is no display on the LCD screen. If there is a high-frequency interference source in the same circuit, press the parameter modification/confirmation button to restore the display; Eliminate interference sources on the same line or set up another line