1、 Equipment inspection and debugging
Before use, it is necessary to check the cleanliness and hygiene of each component of the polishing machine, ensure that the polishing brush, loading hopper, housing, etc. are firmly installed, and test the safe operation of the empty machine, and adjust the speed appropriately. During debugging, it is necessary to test parameters such as running speed and pressure to ensure compliance with requirements.
2、 Capsule processing and operation specifications
1. Choose capsules with smooth and undamaged surfaces, and clean surface impurities with a brush if necessary.
2. Add capsules and an appropriate amount of talcum powder to the loading hopper, adjust to the optimal speed, and manually sort out unqualified products such as empty shells and rotten capsules during the process.
3. When operating, it is necessary to follow the principle of "light rather than heavy" to avoid damage to the capsule caused by excessive polishing.
3、 Polishing agents and safety and hygiene
1. The polishing agent should be used according to the instructions in proportion, and the quality stability should be checked regularly.
2. Keep the environment around the equipment clean, regularly clean the polishing machine, and operators should wear protective equipment such as gloves and masks.
4、 Emergency handling and maintenance
1. In case of emergency, immediately press the red emergency stop button. After troubleshooting, manually reset the counter.
2. Clean up residual polishing agent in a timely manner after polishing, check the equipment status, and perform regular maintenance according to maintenance procedures.
5、 Other details
1. Pay attention to the water level of the gas water separator, and promptly drain if it exceeds the height.
2. Operators need to receive professional training and be familiar with equipment processes and safety regulations.