1、 Preface
In order to ensure the safety of the operators of the microwave vacuum drying equipment for extracts and ensure the good operation of the equipment, the following is a brief introduction to the safety operating procedures of the microwave vacuum drying equipment for extracts:
2、 Equipment Overview
The microwave vacuum drying equipment for paste is a device that places the paste in a drying tank and dries it using a microwave heating drying tank air compressor.
3、 Equipment operation
1. Equipment pre operation:
Connect the device and plug in the power supply.
Control the power button and turn on the device power.
Open all instrument buttons on the dashboard and check if they are functioning properly.
Open the device door and check for the presence of foreign objects.
2. Equipment operation:
Place the substance to be extracted in the drying tank.
Set the desired drying time and temperature on the device control panel, and press the start button to start drying.
3. Equipment stop operation:
When the drying time is over or the task is completed, press the stop button.
Ensure that all instruments on the dashboard have returned to zero.
4、 Equipment precautions
Before operating the equipment, it is necessary to check whether the surrounding area is safe. The work carried out by the equipment requires space, and there must be no other items or personnel around.
2. Operators must wear protective gloves, goggles, and other protective equipment, as well as work clothes.
Before operating the equipment, it is necessary to carefully read the user manual and this operating procedure, and strictly follow the procedure for operation.
After the equipment is used up, a dedicated person should clean the equipment drying tank and rotating shaft, and maintain the cleanliness of the equipment.
5. When repairing and maintaining the equipment shaft and rotary shaft, the power must be disconnected and equipment warning signs must be placed.
6. Flammable, explosive, corrosive, radioactive and other hazardous materials are not allowed to be stored in the drying tank.
7. During the use of the device, it is prohibited to open or move any control panel, button, dashboard, etc.
8. Equipment used in environments with direct sunlight or high temperatures may cause machine malfunction or damage. Operators must ensure the stability of the equipment and operate it in a cool, dry, and suitable climate.
5、 Security Warning
1. Operators are not allowed to operate equipment without professional training.
2. When operating the equipment, it is forbidden to wear gloves or operate with long sleeves to avoid accidents caused by machine clamping.
3. It is prohibited to put flammable, perishable, volatile and other dangerous goods into the equipment for operation.
4. When using this device, it is necessary to strictly follow the operating procedures and not switch any buttons on the control panel at will.
6、 Equipment maintenance
1. The equipment must be maintained at least every three months, including checking whether the equipment is operating normally, whether there are any issues such as leakage or circuit interruption.
2. The equipment must be regularly cleaned and disinfected, with regular motor inspections and maintenance of silicone switches.
VII. Conclusion
The above content is an overview of the safety operating procedures for the microwave vacuum drying equipment for extracts by the editor, in order to ensure the normal operation of the equipment and maintain the safety of the operators.