The rain test room for charging piles of energy storage containers is specially designed for testing the waterproof performance of containers, charging piles and other equipment of the energy storage system, which can effectively simulate the outdoor heavy rainstorm and violent water spraying environmentIPX4/5/6 waterproof test.

1working principle

The laboratory utilizes a control system to precisely regulate the motor-driven water pump, flexibly adjust the flow rate and pressure of the water flow to meet relevant standard requirements, thereby achieving rain testing of energy storage containers. During the testing process, the sprayed water flows through the surface of the energy storage system container and eventually collects in the water treatment tank. In the pool, water is treated through filtration, sewage discharge, and other processes to achieve recycling, which is both environmentally friendly and economical.

IIstructural composition

This equipment mainly consists of a sprinkler system, a water circulation systemThe PLC electrical control system and gantry frame are composed of various components. The sprinkler system achieves comprehensive testing by spraying on the four sides and top of the container. At the same time, it has powerful control functions that can individually adjust the spraying time, spraying angle, water pressure, and water output of each surface. whether it is2Standard energy storage containers of 0 feet and 40 feet, as well as non-standard sized energy storage containers, prefabricated power cabins, charging piles, and other equipment, can all be adapted.

3、 Technical parameters

1. Spray flow rate: 12.5 ± 0.625 (L/min) (IPX5 rating)

2. Spray pressure: 30-150kPa (adjusted according to flow rate)

3. Preset test time: 1S~9999H59M59S, adjustable at any time

4. Spray distance: The sample is 2.5-3m away from the nozzle

5. Spray angle: 15 °~20 °

6. Spray range and speed: Each nozzle sprays water covering an area of about 0.3 meters, continuously swinging and spraying from point A to point B. 7. Movement time is about 3 seconds, continuous spraying for 3 minutes, and the product testing surface receives 60 consecutive direct sprays

8. Transportation method: Container track entry

9. Spray time: A total of 18 minutes to complete the test

10. Spray coverage requirements: Automatic spraying needs to cover the gaps between the left and right side doors, as well as the gaps between the front and rear doors

4Customizability and Parameters

The size and configuration of the laboratory can be customized according to customer needs, fully meeting the testing requirements of different equipment. In terms of rain exposure time settings, it is very flexible and can be adjusted accordinglyFree setting within the range of 0 to 9999 seconds, accurateindeedSimulate various actual rainy scenarios to ensure comprehensive and accurate testing of equipment waterproof performance, strictly in compliance with GB4208-2017 (IEC 60529:2013) IPX4/5/6 protection level standard for enclosure protection level (IP code).

Regarding the aboveRainy testing room for energy storage container charging pilesThat's all for the technical content introduction.