Operation steps for using ultrapure water machine

Nowadays, there are more and more manufacturers of laboratory ultrapure water machines, and people's choices are naturally increasing. The equipment is widely popularized and easy to operate, so some manufacturers only label some usage and precautions in the manual. Users usually take a rough look, which leads to a lack of understanding of the equipment's performance and inevitably results in incomplete operation, leading to poor performance. The following points are a summary of the usage methods of ultrapure water, hoping to help everyone.

Instructions for using an ultrapure water machine:

1. Before using the instrument, please carefully read the product manual to understand the precautions and safety tips.

2. Before installation, a comprehensive inspection should be conducted to observe whether the instrument placed on a flat workbench has a complete appearance, intact plugs, and flexible power switches. And check if the instrument power socket is reliably grounded to ensure safety during operation.

3. When using, first open the ball valve, connect the power supply, and ensure that both the water source and power supply are connected.

4. Observe whether there is any leakage in the ultrapure water machine. If there is any leakage, turn off the power and water ball valve in a timely manner and make adjustments.

5. If everything is normal, turn on the power switch 10-20 seconds later.

6. When using pure water, simply press the water intake button to easily obtain water. With the dual flow outlet of the Youpu ultra pure water machine equipment, you can choose one of the water qualities according to your actual needs.

7. Only when the power is cut off or the power switch is turned off, can the purification column be loaded or replaced, and before replacement, check whether its specifications and models meet the performance requirements of the machine.

8. The installation environment of the instrument should ensure that the temperature does not exceed 40 degrees Celsius in summer and 4 degrees Celsius in winter. To avoid irreparable damage to the instrument.

9. The instrument should be flushed for 10 minutes with a water inlet pressure of less than 0.4 MPa during each start-up or shutdown.

10. When the laboratory ultrapure water machine is not in use for a long time, all power sources and switches should be turned off.