High temperature resistant large airbagAirbags are used to seal the gaps between mechanical components. When inflated, they expand the sealing gap, and when deflated, they retract into the steel groove. The sealing ring has flexibility and plasticity in the inflated state, which can seal the gaps of different sizes in different parts of mechanical equipment, making up for the shortcomings of traditional fixed seals that are not tight locally. Silicone can withstand high temperatures and tear, and is not affected by any other chemical media except for reacting with strong acids and bases, making it an ideal inflatable sealing material.valveThe material used for the air nozzle is stainless steel and brass. You can also use a hose as the air inlet, which can be in close contact with the intake and exhaust ducts without the need for additional sealing rings. The higher the pressure, the tighter the hose contacts the airway wall. Can be connected into a circle or right angle frame according to customer requirements.High temperature resistant airbagSectional shape: circular, square, rectangular, trapezoidal, M-shaped, etc. Different cross-sectional shapes and sizes can be designed according to device width, gaps, etc. Can be connected according to customer requirementsHigh temperature resistant airbagOr a square inflatable sealing frame with four corners.

　　Below, the editor will briefly introduce the uses of high-temperature resistant large airbags, as follows:

1) Used for installation on various mechanical equipment such as swing doors, sliding doors, and flange doors for gas sealing, noise sealing, heat treatment sealing, liquid sealing, such as oven door steam sealing, laboratory noise isolation, pharmaceutical coating machines, isolators, cleaning machines, drying machines, sterile isolation operations, and glove leak detectors for efficient sealing of rear side leaks.

2) Installed on the valve of the material conveying pipeline to form a closed space for conveying powders, particles, and liquids;

3) Install on both sides of the packaging conveyor belt to perform necessary stage control on the packaging box;

4) Used for necessary sealing in electronic product production process control and transportation vehicles.