Emergency spray eye wash is a safety rescue equipment used in the fields of petroleum, chemical, synthetic fiber, dye, medicine, electronics, papermaking, natural gas, electricity, environmental protection, etc. for emergency rescue of chemical agents (containing toxic and corrosive substances such as acid, alkali, organic matter, etc.). When the exposed human eyes and face are accidentally injured, rapid flushing and spraying should be carried out nearby to reduce the degree of injury to a low level, thereby providing better safety protection services for on-site staff. Emergency spray eye washers are also divided into various types, including simple antifreeze, antifreeze, electric tracing, etc., which can be selected and used according to the actual usage environment of the buyer.
So the correct use of emergency spray eye washers is particularly important. When the eyes or body of on-site workers come into contact with toxic, harmful, or other corrosive chemicals, eye washers can provide emergency flushing or rinsing of the injured person's eyes and body, avoiding further harm to the body of on-site workers caused by chemicals. These devices are only for preliminary treatment and cannot replace medical treatment. Further treatment of the injured needs to follow the doctor's arrangements. So what are the correct usage and precautions for emergency shower eyewash.
The correct method for using emergency shower eyewash:
1. Remove the dust cover.
2. Stand in a good position.
3. Request help from other colleagues when necessary.
4. Keep your eyes close to the water outlet.
5. Use your fingers to open your eyelids.
6. Push open the valve with your hand and rinse your eyes with water.
7. After flushing, close the valve.
8. Wear a dust cover.
After rinsing, seek medical attention immediately.
What are the precautions for using emergency shower eyewash correctly? Precautions for using emergency eyewash correctly:
When it is necessary to rinse other parts of the body, pull down the pull rod of the shower hand valve with your hand, and the water will automatically spray out from the shower nozzle. After use, the pull rod must be reset upwards.
2. Eye washers are used in emergency situations to temporarily alleviate the harm of toxic substances to the body, and further treatment requires following the doctor's arrangements and guidance.
When using the eye wash, simply gently push the hand operated valve to rinse the eyes, and clean water will automatically spray out from the eye wash nozzle. After use, the hand operated valve must be reset and the dust cover must be reset.