GF105 tube centrifugeIt is a new type of machine developed in recent years with efficient filtration performance. Its drum shape is more special than that of ordinary centrifuge drums. Currently, there are not many algorithms for calculating the strength of drums with this special shape. In view of this, this article adopts the axisymmetric finite element stress analysis method to conduct overall optimization calculation research on the drum, that is, to optimize the thickness dimensions of the drum body, baffle plate, drum bottom, siphon chamber wall, overflow plate and other related components, and establish corresponding optimization calculation mathematical models.

Before each use, attention should be paid to checking the rotor for corrosion points and minor cracks. It is forbidden to use rotors that have already been corroded or have cracks, and to use rotors that have exceeded their shelf life to ensure personal safety. When using the centrifuge rotor, it is necessary to confirm that the set rotor number is correct. If the rotor number is set incorrectly. It may cause rotor overspeed or fail to achieve the required centrifugal effect. Especially in the case of severe accidents such as rotor explosion caused by overspeed use, we must not be careless.

And without the need for high centrifugal force, the horizontal rotor has the advantage of *. The horizontal swivel head consists of the swivel head itself and a hanging basket, which can accommodate adapters for various specifications of test tubes, providing high flexibility without replacing the swivel head. During the centrifugation process, the basket is thrown out and placed in a horizontal position, and all sediment is located at the bottom of the test tube. The sample centrifuged by the fixed angle rotary head is always located on one side of the test tube at a certain angle. So, horizontal rotation is more conducive to sample recovery. In addition, when the horizontal rotor stops centrifugation, the test tube is always in a vertical direction, making it very convenient to remove the test tube and not easily causing the sample to resuspend; In the fixed angle rotary head, due to the position of the test tube having a certain angle, extra caution is required to avoid re suspension.

　　GF105 tube centrifugeIt is widely used in our daily life, and below are some important advantages and disadvantages that are frequently seen

Advantages: 1. It is a high-speed and high separation factor separation machine.

2. Generally applicable to the clarification of suspensions with solid content less than 1%, solid particles less than 5pm, and very small density difference between solids and liquids;

3. Suitable for separating emulsions with low density difference and high dispersibility between light and heavy liquids.

4. The rotational speed can reach up to 10000-30000 RPM, and the individual factors can reach up to 10000-30000, making it widely used in various professions. For example, purification of lubricating oil, purification of oral liquids, blood products industry, biological products industry, beverage industry, pharmaceutical industry, edible oil industry, purification of coal tar, and so on.

Defect: 1. Intermittent operation.

2. The drum has a small capacity and needs to be stopped frequently to remove sediment. So it is necessary to strengthen the separate theoretical research and centrifugal process research to enhance the separate functions of tube centrifuges Thus, a large-scale centrifugal separator was announced.