The sterilization device uses superheated steam with a large heat source to kill Escherichia coli, general bacteria, and heat-resistant bacteria within 4-5 seconds, with almost no quality change.
The superheated steam powder sterilization device consists of a superheated steam generator, feeding system, constant temperature pipeline heating system, sterilizer, cyclone separator, drying and cooling system, automatic control system, etc. The material enters the sterilization tube and kills harmful bacteria in the pipeline through superheated steam; After the material is discharged from the cyclone, it enters the drying and cooling section, and the finished product is discharged from the cyclone collector. The discharged material can be directly packaged. Overheated steam is circulated through a steam fan, resulting in significant energy savings and good product quality.
The superheated steam powder particle sterilization device, due to its short heating time, performs sterilization under the action of superheated steam. In addition, under the condition of consistent temperature in the entire airflow pipeline, this sterilization device can ensure that the effective components of the material are not lost and various changes such as acidification are controlled to a minimum.
The sterilization device has a wide operating range and is easy to use. Due to various processing conditions such as pressure and temperature that can be set arbitrarily, it has a wide operating range and is suitable for various industries.
The sterilization device is easy to clean, and the original inlet can be used as the cleaning water inlet to conveniently clean the pipeline. After cleaning, the machine can be dried by heating.
The sterilization device saves energy, and the superheated steam is recycled for less heat loss. After the electric heating reaches the required temperature, very little compensation electricity is used, making it an energy-saving device with high automation and easy operation.
Powder and particle sterilization device, this device is a sterilization system that uses superheated steam to continuously sterilize a wide range of powder and particle materials, such as powder raw materials, sliced raw materials, and granular raw materials, for 4-5 seconds.
Using superheated steam with high thermal energy, the coliform bacteria, general bacteria, and heat-resistant bacteria are sterilized in a short period of 4-5 seconds
The superheated steam powder particle sterilization device has almost no quality change. Due to the short heating time and sterilization in a state without air, coupled with the fact that the sterilization temperature inside the entire airflow tube is basically the same, it can ensure that the loss of effective ingredients and various quality changes such as acidification are controlled to a small extent.
The operation range is wide and easy to use. Due to various processing conditions such as pressure and temperature that can be set arbitrarily, the operation range is wide and suitable for heating and sterilizing various powders and particles. Easy to clean, using the raw material inlet as the cleaning water inlet allows for convenient airflow cleaning operations. The drying operation after cleaning can be carried out using the electrical heater in the equipment.
Energy saving, superheated steam is used in a cyclic manner with minimal heat loss. It is an energy-saving device.