Disc continuous dryer is an efficient conductive continuous drying equipment. Its structure and working principle determine that it has the characteristics of high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation and control, and good operating environment. It is widely used in drying operations in industries such as chemical, pharmaceutical, pesticide, food, feed, and agricultural and sideline product processing. Highly praised in practical applications across various industries.
What are the main characteristics of a disc continuous dryer? as shown below
（1） Easy installation and small footprint
♦ The dryer is shipped as a whole and only needs to be lifted into place for easy installation and positioning.
♦ Due to the layered arrangement and vertical installation of the drying tray, the drying area is large while the footprint is small.
（2） Simple and easy to operate
♦ The operation of driving and parking the dryer is very simple.
♦ After stopping the feeding, the rake blades can quickly empty the material inside the dryer.
♦ Through the special large-sized inspection door mirror, it is possible to perform very detailed cleaning and observation inside the equipment.
（3） Good operating environment, recyclable solvents,
♦ Dust emissions meet the requirements for atmospheric pressure type: Due to the low airflow velocity inside the equipment and the low temperature distribution of the equipment, it is difficult for dust to float to the top of the equipment, so the exhaust gas discharged from the top moisture outlet contains almost no dust.
♦ Sealed type: equipped with a solvent recovery device, which can easily recover organic solvents from wet gas. The solvent recovery device is simple and has a high recovery rate. For flammable, explosive, toxic, and easily oxidizable materials, nitrogen can be used as a carrier gas for closed-loop circulation to ensure safe operation. Specially suitable for drying flammable, explosive, and toxic materials.
♦ Vacuum type: A disc dryer operated in a vacuum state, particularly suitable for drying heat sensitive materials.
（4） Easy regulation and strong applicability
♦ By adjusting the thickness of the material layer, spindle speed, number of rake arms, rake blade form and size, the drying process can be optimized.
♦ Each layer of the drying tray can be separately filled with hot or cold medium to heat or cool the material, and the temperature control of the material is accurate and easy.
♦ The residence time of materials can be precisely adjusted.
♦ The material flow is single, with no backmixing phenomenon, uniform drying, stable quality, and no need for further mixing.
（5） Low energy consumption
♦ The material layer is very thin, the spindle speed is low, and the material conveying system requires less power and consumes less electricity.
♦ Drying with conductive heat results in high thermal efficiency and low energy consumption.