Wet mixing granulator is a cylindrical container where the material and adhesive are thoroughly mixed into wet soft material from the bottom slurry, and then cut into uniform wet particles by high-speed crushing slurry placed on the side.

Structure of Wet Mixing Granulator: It mainly consists of a conical hopper, stirring blade, granulation knife, feeding device, liquid inlet device, discharge and control system, as well as auxiliary systems such as inflation sealing, water filling cleaning, jacket water cooling, etc. Adopting a horizontal cylindrical structure, the drive shaft is fully sealed and can be switched to water during cleaning. Fluidized granulation results in approximately spherical particles with good flowability. Reduce adhesive by 25% compared to traditional processes and shorten drying time. Each batch of dry mixing takes 2 minutes, and granulation takes 1-4 minutes, which is 4-5 times more effective than traditional processes. Completed in the same closed container, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards. The entire operation has strict safety protection measures.

Characteristics of Wet Mixing Granulator:

1. Inflatable sealed drive shaft, can be switched to water during cleaning.

2. The wet mixing granulator adopts a horizontal cylindrical structure with a reasonable structure.

3. Wet mixing granulator reduces adhesive by 25% and shortens drying time compared to traditional processes.

4. The entire operation of the wet mixing granulator has strict safety protection measures.

5. Wet mixing granulator is used for liquid granulation, resulting in nearly spherical granules with good flowability.

6. Each batch is dry mixed for 2 minutes and granulated for 1-4 minutes, which increases efficiency by 4-5 times compared to traditional processes.

7. The wet mixing granulator completes the process of dry mixing wet mixing granulation in the same batch of closed containers, reducing the process and complying with GMP specifications.