-
E-mail
734528265@qq.com
-
Phone
18615200928
-
Address
No. 96 Dangyang Road, Huaiyin District, Jinan City
Jinan Tianyu Special Equipment Co., Ltd
Safety operation and daily maintenance instructions for Sanqi ultrafine crusher
Date: 2025-06-12Read: 5
Sanqi ultrafine grinderIt is a key equipment for traditional Chinese medicine processing, and standardized operation and scientific maintenance are crucial for ensuring production safety and product quality.
1、 Safe operating procedures are important guidelines. Before operation, a comprehensive inspection of the equipment status is required to confirm that the protective devices are intact and that all components are securely fastened without any looseness. When feeding, it is necessary to maintain a uniform and appropriate amount to avoid overloading or blockage of the motor caused by excessive feeding. It is strictly prohibited to insert hands or tools into the crushing chamber during equipment operation to prevent accidental injury. Operators should wear tight fitting work clothes and protective equipment, and long hair should be tied up. When the equipment is abnormal, it should be stopped immediately for inspection and troubleshooting before continuing to use.
2、 The key points of daily maintenance directly affect the lifespan of the equipment. After each use, the residual Sanqi powder in the crushing chamber and sieve should be cleaned in a timely manner to prevent clumping and affect the next use. Regularly check the wear of cutting tools, replace passivation in a timely manner to ensure the effectiveness of wall breaking. Bearings and transmission components need to be regularly lubricated with grease to reduce friction losses. The electrical system should be kept dry and clean to avoid dust accumulation and short circuits. Before long-term use, the equipment should be cleaned and covered with a dust cover.
3、 Special maintenance of critical components cannot be ignored. The screen mesh is a vulnerable component and needs to be regularly inspected for damage. If it is deformed or damaged, it should be replaced in a timely manner. As the core working component, the cutting tool needs to maintain sharpness, and passivation will affect the crushing efficiency and uniformity of the finished product. Seals should be regularly inspected for aging to prevent dust leakage. The motor and bearings need to be regularly checked for temperature, and abnormal heating may indicate potential faults.
4、 Operator training is a guarantee for safe operation. Regular operational training should be organized to ensure that each employee masters standardized operating procedures and emergency response measures. Establish equipment usage records, document each maintenance and upkeep, and provide a basis for equipment management.
Scientific safety operations and standardized daily maintenance can prolongSanqi ultrafine grinderService life ensures processing quality while reducing production costs and safety risks. Standardized equipment management is an important foundation for the production of traditional Chinese medicine.