-
E-mail
sanqingjixie@163.com
-
Phone
13969126696
-
Address
No. 13788 Century Avenue, Lixia District, Jinan City, Shandong Province, China. Pilot Base Address: No. 677 Tianchen Road, High tech Zone
Jinan Yichen Ultra fine Grinding Technology Co., Ltd
Working principle and application of ultrafine grinding vibration mill
Date: 2025-10-15Read: 44
Ultra fine grinding vibration mill is a device that achieves material ultrafine grinding through high-frequency vibration. Its core working principle is to use the inertia centrifugal force generated by the exciter to drive the cylinder to vibrate, causing the grinding medium (such as steel balls, ceramic balls) to have impact, friction, and shear effects on the material, ultimately crushing the material to the micrometer level (10-25 μ m) or even nanometer level. The specific process includes: after the material and grinding medium are loaded into the cylinder, the exciter generates high-frequency vibration (usually 1000-3000 times/minute) by rotating the eccentric shaft, and the medium forms a throwing motion under the vibration, repeatedly squeezing and grinding the material. Some equipment is also equipped with a low-temperature system (such as a minus 25 ℃ compressor), which is suitable for crushing heat sensitive materials.
1、 Main application areas
1. Medicine and health products: Cell level wall breaking of traditional Chinese medicinal materials such as Dendrobium officinale and Ganoderma spore powder can improve the dissolution rate of active ingredients (such as the dissolution rate of over 85% when Sanqi powder is crushed to 2000 mesh).
2. Chemical and New Materials: Used for preparing highly active powders such as catalysts, nanomaterials, etc., their specific surface area and reaction activity are significantly better than traditional crushed products.
3. Food processing: Suitable for ultrafine grinding of low melting point or heat sensitive materials, such as cocoa powder, spices, etc., which can improve solubility and taste.
2、 Technical advantages
1. Particle size controllability: By adjusting the vibration frequency and grading system, the particle size of the finished product can be precisely controlled (D97 error ± 2 μ m).
2. Low temperature crushing: equipped with a refrigeration system to avoid denaturation of heat sensitive materials.
3. Efficient and energy-saving: Compared with traditional crushers, energy consumption is reduced by more than 30%, and a single device can be produced on a large scale.
The vibration mill is divided into single cylinder and multi cylinder types according to the number of cylinders, and there are intermittent and continuous types according to the working mode. Users can choose the appropriate model based on the material characteristics.
