The horizontal spiral belt mixer mixes materials efficiently and quickly. Under the movement of the spiral belt of the mixing shaft, the inner and outer spiral belts flip the materials over a large range. The inner spiral belt moves the materials to both sides, while the outer spiral belt moves the materials from both sides inward, causing the materials to permeate and mix back and forth. Another part of the materials is pushed down by the spiral belt, without axial or radial movement, thus forming a convective cycle. Due to the stirring of the aforementioned motion, the material achieves rapid and uniform mixing in a relatively short period of time. This device is used for the mixing of solid (i.e. powder to powder) and slurry (i.e. powder to slurry) in pesticides, veterinary drugs, food, chemicals, biology, aquaculture, ceramics, refractory materials, plastics, compound fertilizers, etc. It is also particularly suitable for mixing viscous materials.

Below, the editor will briefly introduce the performance characteristics of the horizontal screw belt mixer, as follows:

1. The forward and reverse rotating spiral bars are installed on the same horizontal axis to create a low-power and high-efficiency mixing environment. The spiral shaped blades are generally made into double or triple layers, with the outer spiral collecting the material from both sides to the center, and the inner spiral conveying the material from the center to both sides, which can create more vortices in the flow of the material. Accelerated mixing speed and improved mixing uniformity.

2. This device has a wide range of applications and can be used for stirring and mixing powders with powders, powders with liquids, especially for stirring paste like, viscous, or high specific gravity materials.

3. The U-shaped long cylinder structure ensures low resistance movement of the mixed material (powder, semi fluid) inside the cylinder.

4. The horizontal screw belt mixer is a new type of mixing equipment with high efficiency, high uniformity, high loading coefficient, low energy consumption, low pollution, and low crushing.

5. The belt pulley is used to drive the cycloidal reducer, and compared to the high torque of the gear reducer, the elastic connection of the belt transmission has the advantage of protecting the transmission components during overload.

6. Composed of a U-shaped container, spiral stirring blades, and transmission components.