1、 Maintenance Regulations
1. Regular maintenance
The tunnel sterilization oven needs regular maintenance and upkeep. Validate the oven according to durability assessment, regularly clean the surface and internal components of the equipment, inspect various parts of the equipment for faults and wear, and promptly carry out maintenance.
2. Cleaning and maintenance
During the use of tunnel sterilization ovens, the accumulation of dust or dirt should be avoided. Before and after use, the surface and internal components of the oven should be cleaned. Cleaning must be carried out after shutting down or shutting down the machine, and the use of water is prohibited during the cleaning process. Clean with a clean, soft cloth. If the controller, rotor, etc. inside the oven are found to have accumulated dirt, they should be cleaned in a timely manner.
3. Component replacement
During long-term use of the tunnel sterilization oven, the internal components of the equipment may experience varying degrees of wear. If aging or wear is found in the internal components of the equipment, they must be replaced in a timely manner to avoid affecting the normal operation of the equipment.
2、 Precautions
1. Safe operation
Be sure to pay attention to safety when operating the tunnel sterilization oven. Protective gloves must be worn during operation to avoid burns from high-temperature components. At the same time, the oven should be placed on a stable surface to avoid accidental tipping or damage to the equipment.
2. Prevent cross infection
When processing items, the tunnel sterilization oven must strictly follow the operating procedures to prevent cross infection. Especially when handling biological samples, separate workstations and tools must be used for operation, and mixing with other items is prohibited to avoid the risk of infection.
3. System maintenance
The tunnel sterilization oven requires regular system maintenance and inspection to ensure the normal operation of the equipment. In the process of use, if there is a malfunction or abnormal situation, timely maintenance or replacement of components must be carried out. When performing maintenance operations, it is necessary to follow the relevant operating procedures and strictly follow the equipment manual for maintenance.