Ultrasonic extractor is a commonly used equipment in chemical laboratories, which utilizes ultrasound to assist in the extraction and separation of materials. However, there are certain risks and safety hazards associated with using this device, so it is necessary to pay attention to some safety operating procedures when operating the ultrasonic extractor.
1. Understand the equipment operation specifications
Before using the ultrasonic extractor, it is necessary to carefully understand the operating specifications and manual of the equipment. Familiar with the working principle, usage method, and troubleshooting of the equipment to avoid unnecessary safety hazards.
2. Check the equipment before operation
Before using the ultrasonic extractor, check if the equipment is in normal working condition. Check if the liquid level is normal, if the liquid has caused damage to the equipment, and if it needs to be replaced.
3. Wear personal protective equipment
When operating the ultrasonic extractor, personal protective equipment such as gloves, glasses, masks, etc. must be worn to avoid injury from ultrasonic waves or harmful gases.
4. Avoid direct exposure to ultrasound waves
Ultrasonic waves generate high-frequency vibrations, and direct exposure to them can cause damage to the human body, so direct contact with ultrasonic waves must be avoided.
5. Avoid placing hands and objects on the device
When operating the ultrasonic extractor, do not place your hands and objects on the device to avoid injury to your hands and objects caused by ultrasonic vibration
6. Immediately shut down the device after stopping the operation
After each use of the ultrasonic extractor, the equipment should be turned off promptly. Do not turn on or place the device to avoid unforeseen safety issues.
7. Ensure equipment maintenance and upkeep
Ultrasonic extractors require regular maintenance, including liquid level maintenance, liquid replacement, cleaning, and disinfection. These operations need to be performed after shutting down the device to avoid accidents during the operation process.