Operating Procedures
1、 Equipment preparation
1. Check whether the electrical equipment is operating normally and whether there is any leakage.
2. Check if the related equipment such as air pressure and vacuum pump are operating normally.
3. Prepare the necessary accessories, raw materials, and packaging materials.
2、 Operation steps
1. Turn on the power switch, start the device, and enter standby mode.
2. Check whether the various parameters of the machine meet the operational requirements.
3. Put the required medication into the equipment, start the machine, and perform the coating operation.
4. Monitor the operating status of the equipment, promptly detect and handle any abnormal situations.
5. After completing the coating operation, turn off the equipment and clean it.
3、 Precautions
1. Before use, it is necessary to thoroughly check whether the equipment is operating normally and whether maintenance or repair is needed.
2. During operation, it is necessary to avoid situations such as damage to packaging materials and waste of raw materials.
3. Keep the work environment clean and ensure the normal operation of the machine.
Maintenance Regulations
1、 Daily maintenance
1. Regularly clean and scrub the equipment.
2. Clean the inlet, outlet, air valve and other parts.
3. Regularly replace parts that wear out quickly.
4. Regularly inspect all mechanical components for wear, looseness, etc., and adjust them according to the instructions.
2、 Temporary maintenance
1. When abnormalities are detected in the machine, immediately stop it for inspection and maintenance.
2. If parts need to be replaced, the replacement process should be strictly carried out in accordance with the instructions.
3. Regularly conduct comprehensive inspections of equipment to prevent machine malfunctions caused by improper maintenance.
3、 Long term maintenance
1. Conduct a comprehensive inspection of the machine, replace the parts that need to be replaced, and ensure that all parameters meet the operational requirements.
2. Pay attention to the storage conditions of the machine to avoid the inability to operate normally due to long-term disuse.
3. Establish equipment records to enable faster and more accurate repairs in case of issues.