Low temperature vacuum drying oven is a specialized equipment used for laboratory sample drying and material processing. During the use and maintenance of this device, it is necessary to follow reasonable operating procedures and standards. In order to ensure the normal operation and safety of the equipment, today the editor will take you to understand the safety operating procedures of the low-temperature vacuum drying oven.
1、 Equipment installation
Before installing the low-temperature vacuum drying oven, it is necessary to carefully inspect the appearance and function of the equipment to ensure that it is intact and undamaged. When installing equipment, the following specifications should be noted:
1. Place the equipment on a flat surface and ensure good ventilation around the equipment.
2. When connecting the device power supply, it is necessary to first check the stability of the power supply and whether the wiring is secure.
3. In order to prevent equipment from generating vibrations and noise, fixed measures should be taken, such as positioning the base and ground, shock absorbers, etc.
2、 Equipment operation
Before using a low-temperature vacuum drying oven, carefully read the equipment operation manual to understand the equipment performance and specifications. When operating, be sure to follow the following specifications:
1. Protective gloves and goggles must be worn during operation to ensure safety.
2. Before operation, check whether there are any debris or missing fog components inside the equipment.
3. After turning on the device power, temperature and time parameters should be set according to the manual specifications.
4. When stopping the operation, it is necessary to shut down the equipment components including the vacuum pump, control panel, etc. one by one according to the normal process.
5. Do not cut off power, unplug or plug power cords, or change equipment control parameters during use.
3、 Equipment maintenance
In order to ensure the long-term performance and normal operation of the equipment, regular maintenance must be carried out on the low-temperature vacuum drying oven. During maintenance, the following regulations should be followed:
1. Check for damage or wear on the equipment casing and cables.
2. Check whether the internal circuits, exhaust pipes, vacuum pumps, and other fog components of the equipment are damaged or abnormal.
3. Regularly clean equipment and mechanical components to ensure normal operation of the equipment.
4. Check the accuracy of control parameters and the service life of the equipment.