The horizontal mixer is driven by the inner and outer diameter screws installed on the mixing shaft to flip the material inside the barrel, allowing the mixer to flip the material within the barrel. In terms of the structure of the mixer, the spiral is designed as an inner and outer, left and right opposite spiral. When the mixer is working, the inner spiral drives the material near the axis to rotate axially from the inside to both sides, while the outer spiral drives the material near the cylinder wall to rotate axially from both sides to the inside. This causes the material to circulate and shear infiltrate in the simplified structure, completing the rapid and uniform mixing of the material in a short period of time.
The structural characteristics of the horizontal mixer:
1. For a complete machine base, the transmission system operates flexibly and smoothly. The workpieces in contact with the mixing slurry and materials are made of stainless steel, which has good corrosion resistance and can maintain the quality of the mixed materials without pollution or discoloration.
2. The transmission mechanism mainly adopts worm gear and worm gear direct transmission, with no excessive noise during use and sufficient oil storage, which can obtain good lubrication and improve the service life of the machine. The control and operation of the electrical equipment on this machine are simple, and the use of jog material pouring reduces the labor intensity of the operator.
Horizontal mixer is used to mix dry and powdery materials, which can achieve the purpose of uniform mixing. In mixed production, horizontal mixer is also a common mixer. The main advantages of horizontal mixer generally include the following aspects:
1. The horizontal structure has a lower body height, making it easier to install.
2. The horizontal mixer is mainly used for the production of putty powder and can also be used as an entry-level insulation mortar mixer.
3. The smooth mixing process reduces the damage to fragile materials, and the installation of a flying knife structure also has a crushing effect.
4. In the mixing structure, the forward and reverse rotating screws are installed on the same horizontal axis to create a low-power mixing environment.
5. Under the feasibility factor, the mixing effect of the horizontal mixer is not affected by the size and density of the particles, and it also has a good mixing effect on viscous materials.