The water chestnut sugar coating machine consists of a body, a worm gear box, a sugar coating pot, a heating device, a fan, electrical appliances, and other main parts. It is driven by an electric motor through a triangular belt to drive the worm gear, worm gear, and drive the sugar coating pot to rotate. Under the action of centrifugal force, the material is rolled up and down in the pot to achieve the effect of sugar coating mixing, pill making, and polishing. So, how to properly use and maintain the water chestnut sugar coating machine? Today, the editor will take you to understand.

Precautions for using the water chestnut sugar coating machine:

1. After the machine is in place, it must be placed steadily and fixed with anchor bolts.

2. Open the oil cap and add lubricating oil to the gearbox to the oil gauge line.

3. Place the electrical control box on the dry and easy to operate side. After turning on the power, pay attention to its compatibility and rotate the sugar coating pot clockwise.

4. During the test drive, attention should be paid to whether there is any abnormal noise from the machine, in order to stop and check in a timely manner.

5. The inclination angle of the sugar coating pot is related to the filling capacity and object exchange performance. Generally, when the filling amount is moderate and the sugar coating pot has a tilt angle of 30 degrees? At that time, its production efficiency and quality were both good.

The use of water chestnut sugar coating machine:

1. Before starting up, it is necessary to check whether the reducer has added lubricating oil to the oil mark line, whether the fasteners of each part of the machine are loose, and clean the pot body.

2. When the power is turned on, the pot body should rotate clockwise, that is, the triangular tape drive should be consistent with the label on the belt cover. After running the machine for 2 minutes without any abnormalities, it can be put into operation.

3. The inclination angle of the sugar coating pot is related to the device and object exchange performance, and the production efficiency and quality are better when the inclination angle is 30 °.

Maintenance of water chestnut sugar coating machine:

1. The lubricating oil of the reducer should be replaced regularly and the lubricating grease at the rolling bearings should be added. The lubricating oil can be replaced once every six months.

2. It is not allowed to dismantle belt protection covers, wire boxes, and other components at will.

3. If the machine is not used for a long time, it should be wiped clean, and if the pot body is made of copper, it should be coated with oil on the surface to prevent oxidation.

4. Mechanical maintenance appliances should be covered in a timely manner to ensure safe use.

5. The machine must be grounded.