Proper maintenance and upkeep of the swing pellet machine can effectively ensure the normal operation of the equipment and extend its service life. Today, the editor will take you to understand the maintenance procedures of the swing pellet machine.
1. Keep the pellet machine clean and hygienic, and strictly follow the "Standard Operating Procedure for Swing Granulator" (code: SOPGC-09-007 R00) for operation.
2. The power switch must be turned off every time the machine is stopped, and overloading is not allowed during production.
3. The temperature of the gearbox shall not exceed 50 ° C.
4. Regularly observe whether the automatic oil supply situation reflected by the oil sight glass is normal.
5. The whole machine is inspected every six months.
6. If there are abnormal situations in production such as strange noises, burning odors, etc., the vehicle should be stopped immediately for inspection and repaired before use. If not in use for a long time, it should be covered with tarpaulin.
7. Add 30 # engine oil to the reducer, and the amount of oil should be added to the full teeth of the lower worm gear.
8. Add 2 # Li Ji lubricating grease to the double row centripetal shaft of the crankshaft, and replace it every 3 months.
9. Inject 30 # engine oil into the remaining bearings with an oil gun, and add it once before each shift.
10. Regularly inspect the fastening and wear of vulnerable parts, as well as the condition of circuits and switches.