The maintenance and upkeep of the electromagnetic induction aluminum foil sealing machine should follow the following key steps, combined with operating standards and fault prevention measures:
1、 Key points of daily maintenance
1. Cleaning and Inspection
Regularly clean the surface residue of the induction head to avoid uneven heating or short circuits caused by dirt.
Check if the white plywood board is burnt or discolored. If insulation paint is found to be carbonized, replace the induction coil immediately.
2. Cooling system management
When the temperature of the sensing head exceeds 80 ℃, it should be temporarily stopped and forced to cool to room temperature before operation.
Regularly check the cooling indicator light and water tank level to ensure the normal operation of the cooling system.
2、 Regular maintenance measures
1. Component inspection and replacement
Check the conveyor belt, sealer, and aluminum foil base every month to ensure there is no looseness or wear.
Replace the sealer and aluminum foil roll every quarter to maintain stable sealing quality.
2. Lubrication and transmission maintenance
Add lubricating oil to components that make abnormal noise (such as gears) and check the cleanliness of the transmission device.
3、 Precautions for use
1. Avoid operating on metal countertops or metal containers to prevent damage to the machine.
2. Before sealing, ensure that the bottle cap is tightened to avoid sealing failure due to looseness.
3. Stop using the equipment immediately when it malfunctions, and restart it after professional repair.
4、 Common fault handling
1. Overcurrent alarm: Check if the water pump/fan is running or adjust the power to the minimum before restarting.
2. Poor sealing: Check the distance between the sensing head and the bottle mouth, and adjust the distance with a non-metallic baffle if necessary.
Systematic maintenance can extend equipment lifespan and ensure that sealing quality meets industry standards.