The UV aging test box for photovoltaic modules is a type of environmental testing equipment. Of course, the use of the UV aging test box for photovoltaic modules cannot be separated from the power supply. Although the UV aging test box has a wide range of applications, not everyone knows how to wire it. Today, the editor of Suzhou Yunuo Instrument will summarize a few points for our new and old customers to refer to when wiring this equipment:

　　

*Do not connect the ground wire to the neutral wire of the power supply;

Secondly, the grounding wire of the UV aging test chamber shall not be connected to the gas or water pipe;

Thirdly, when assembling the power supply of the UV aging test chamber, it must be operated by a professional electrician; Most companies have professional electricians.

Fourthly, please confirm whether the capacitance of the main switch of the UV aging test chamber meets the equipment requirements. Each device has a current requirement standard and cannot be overloaded;

Fifth: Do not share the power supply of the device with other high and low temperature test chambers or others to prevent switch overload and test failure; Prevent equipment malfunctions from affecting troubleshooting during transportation;

Sixth: The outer shell of the test box must be in contact with the ground during installation. If the test box is not grounded, there is a risk of electric shock if there is leakage;

Seventh: Please reliably connect the grounding wire (yellow green line) of the UV aging test chamber to the grounding terminal, so that the leakage switch can cut off the main power supply in case of equipment leakage, thereby preventing personnel from getting electric shock.

　　

The company is dedicated to providing customers with more and better services through its products and excellent service. We welcome your arrival.