Anti mold test chamber is an industrial equipment that is a dehumidification platform established based on the development of high-tech process equipment. It can meet the humidity requirements of various fine configurations and electronic device storage. Let's learn about it belowMold proof test boxThe importance of use:
1. Please confirm that the box door is tightly closed during device operation. Before opening the door, pay attention to the temperature inside the box to avoid burns or frostbite.
2. Avoid repeatedly turning on/off the refrigeration unit within fifteen minutes.
3. Circuit breakers and over temperature protectors are used to provide safety protection for local testing products and operators, so please check them regularly.
4. All samples should be evenly placed, and the placement of samples should ensure that they are within the effective space of the workspace.
5. When plugging in or unplugging the communication interface connection line between the test box and the computer, the computer power must be turned off first, and live plugging and unplugging are not allowed. Live plugging and unplugging may damage the controller or computer's communication module.
6. Do not cut off the power supply when the device is running at high temperatures, especially when there is a thermal load inside the device. This can easily cause local overheating, leading to the burning of components inside the equipment.
7. After the experiment is completed, do not immediately open the workshop door to avoid the impact of cold and hot air currents on the operator. If it is necessary to take out the test sample immediately, insulated gloves must be worn to avoid burns or frostbite.
8. When the experimental work is completed and the test box is not in use, be sure to turn off the main power switch to prevent unexpected situations such as lightning strikes.
The above are the precautions to be taken when using the mold proof test box. We hope everyone can pay attention to them.