Spray filling machine is a commonly used type of filling machine. Many customers will ask about its instructions. Below is a brief introduction by the editor, as follows:
Instructions for use of spray filling machine
1. Before driving, you must first use the joystick to rotate the machine and check if there is any abnormality in its rotation. Only after confirming that it is normal can you start driving.
2. Because the spray filling machine is an automatic machine, the sizes of easy to pull bottles, bottle mats and bottle caps are required to be uniform.
3. When adjusting the machine, tools should be used appropriately. It is strictly prohibited to use excessive tools or force to disassemble parts to avoid damaging the components or affecting the performance of the machine.
4. Whenever the spray filling machine is adjusted, the loosened screws must be tightened, and the machine can be started after turning the machine with a crank handle to check whether its action meets the requirements.
5. The spray filling machine must be kept clean. It is strictly prohibited to have oil stains, liquid medicine or glass debris on the machine to avoid damage to the spray filling machine. Therefore, it is necessary to:
During the production process of the spray filling machine, the liquid medicine or glass chips shall be removed in time. Before work, each part of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. Clean thoroughly once a week, especially areas that are not easily accessible during normal use, or blow them clean with compressed air.