SPN400type

single plate number piece machine

1、 Purpose and Characteristics

The single disc counting machine is mainly used for small-scale quantitative packaging of capsules and tablets, and is suitable for small and medium batch production in pharmaceutical factories, research institutions, and laboratories.

This machine adopts flexible transmission and mechanical eccentricity to generate vibration in the disc. Adjusting the eccentricity can increase or decrease the vibration of the eccentric disc, which is stable and reliable; Design is scientifically simple; Easy to use, small in size, and lightweight.

2、 Technical parameters

production capacity4-16Bottle (bag)/min

Diameter of several boards: Φ400mm

Applicable molds (customized particle size): Capsules, pills

Vibration motor power:0.12Kw

Main motor reducer power:15W

Machine weight:45Kg

External dimensions: 560×445×785

3、 Usage method

1Connect the power supply, adjust the vibration level as needed (it has been adjusted before leaving the factory, and users generally do not need to adjust it), and adjust the speed of several discs.

2Put in capsules or pills (capsule molds are different from pill molds, depending on user needs), turn on the vibration motor switch and adjust the amplitude to fill the holes in the counting plate within the required time.

3When bottling, place the bottle or bag at the discharge port and rotate the counting disc. The amount of filling should be an integer multiple of the number of holes in the disc, such as: need to be filled200piece/The number of holes in the bottle and disc is100For every bottle filled, the counting plate needs to be rotated2Circle.

4、 Precautions

1Capsules or tablets should not work after being exposed to moisture.

2The part of the counting disc should not be heavily pressed, otherwise it cannot work properly.

3To adjust the vibration level, first remove the upper disc and cover, gently rotate the pulley, and observe the position of the adjustment hole of the eccentric seat at the waist hole in the middle of the bearing seat. After seeing the hole, fix the central axis with pliers and insert a round steel smaller than the aperture into the hole to adjust the eccentricity. The eccentricity cannot be adjusted too much, otherwise it will cause several discs to collide with the enclosure, affecting several discs.

4After using the machine, the power should be cut off. If the power is not cut off, it will affect the service life of the governor.

5Choose a disc that matches the required number of tablets or capsules, neither too large nor too small.

6Replace several disks Remove the enclosure4Fix the bolt and remove it; Remove the top of the spindleM12Cover the cap, remove the cover and several discs in sequence. Install in reverse order and pay attention to adjusting the distance between the retaining ring on the enclosure and the several discs (approximately1mmLeft and right, without colliding with each other