In industries such as pharmaceuticals and food (such as candy manufacturing),Rotary tablet pressWith its high efficiency, stability, and precise control of tablet quality, it has become a key equipment on the production line. Mastering its correct usage method can not only ensure production efficiency, but also ensure that products meet quality standards. Here are the detailed operation points for you.

Before operation, the preparation work must be solid. First, thoroughly clean the machine by wiping the outer shell with a clean, soft, and damp cloth to remove any residual powder, sugar shavings, or other impurities that may contaminate the raw materials; Carefully inspect the punching device to ensure that the punch and punching die surfaces are smooth and free of wear and deformation. Install suitable molds according to production needs, such as circular, irregular, and other shapes. After installation, tighten the fixing screws to confirm that the mold is stable. At the same time, the material to be compressed is subjected to pre-treatment. Powdered materials need to be sieved to remove large particles and clumps, ensuring uniform particle size and good flowability, laying the foundation for uniform compression.

When turning on the machine, connect the power and turn on the control switch. At this time, the machine is idling and preheating. The operator should pay attention to the sound of operation and observe whether there is any abnormal vibration or jamming of the machine. If there is noise or severe shaking, the machine should be stopped immediately for inspection, and problems such as loose belts and motor faults should be checked. Once the machine reaches a stable speed, it is ready to add materials. Slowly pour the processed material into the hopper located at the center of the rotating table, and the material is evenly filled into the mold holes under the dual action of centrifugal force and gravity.

Parameter control is crucial in the tablet pressing process. Adjust parameters such as pressure and speed through the control panel based on material characteristics and tablet requirements. Reduce the rotational speed and increase the pressure appropriately for materials with high viscosity to prevent sticking and impact; Materials with good fluidity can increase rotational speed and efficiency, but the pressure should not be too high to avoid cracking of the tablets. During the operation, closely monitor the tablet output and regularly inspect indicators such as tablet weight, hardness, thickness, and disintegration. Once deviations are found, adjust the parameters in a timely manner to ensure stable and uniform quality of each batch of tablets.

After production is completed, turn off the power and perform meticulous cleaning and maintenance on the machine. Dismantle the die, clean the punch and residual materials inside the die with specialized tools, wipe them clean with alcohol or water, apply rust proof oil, and store them properly; Clean the hopper and machine surface to create a clean environment for future use. Regularly inspect key components such as transmission gears, bearings, etc., add lubricating oil, replace worn parts, and extend the service life of the machine.

From rigorous preliminary preparation, to meticulous process control, to final maintenance and upkeep, following the standards step by step, the rotary tablet press can continuously output high-quality tablets, injecting strong power into the production of various industries.