1、 Preparation in advance
1. The gold inspection weighing machine should be installed in a stable, safe, water free, and dust-free place.
2. Before using the device, carefully read the device's instructions.
3. Confirm whether the gold inspection weighing machine is in normal working condition. After powering on, wait for more than 5 minutes until data and standard values appear on the instrument display screen before proceeding with the operation.
4. Before operation, check for any obstacles and debris around the equipment, and if necessary, use a vacuum cleaner or cleaner to clean the equipment.
5. Before operation, it should be ensured that the gold inspection weighing machine is firmly connected to the ground to ensure normal weighing.
6. Strictly calibrate according to the regulations of the gold inspection weighing machine to ensure the accuracy and stability of the instrument.
7. It is recommended to regularly maintain and upkeep the gold inspection weighing machine to maintain its good condition.
2、 Operating standards
1. Before operation, the tested object should be carefully inspected and placed in the designated location according to the prescribed method to ensure accurate test results.
2. During testing, it is not allowed to quickly move, trek, or vibrate around the metal inspection and weighing machine. Items with high density or volume should not be placed on the metal inspection and weighing machine to avoid affecting the test results and equipment stability.
3. During the measurement process, the operator must not leave the equipment and should concentrate on the operation, closely monitoring the test results. At the same time, they should not touch or operate the metal inspection and weighing machine at will. Before the end of the testing process, they should not move or take away any items brought on the spot,
4. After the measurement is completed, the testing site should be cleared and the equipment should be kept clean and dry.
3、 Safety precautions
1. During the operation process, it is necessary to strictly follow the operating procedures to avoid potential safety hazards caused by unreasonable and improper operations.
2. Smoking, use of open flames or high-temperature equipment and other dangerous items are strictly prohibited around the gold inspection weighing machine to ensure the stability and safety of the testing operation.
3. When operating the integrated gold inspection and weighing machine, always remain vigilant to avoid accidents.
4. During the operation, it is not allowed to arbitrarily increase or decrease the load of the equipment, and the load regulations of the equipment must be strictly followed to ensure that the instrument is used in normal working condition.
5. If there is an abnormality in the device, the operation should be stopped immediately and professional personnel should be notified for investigation and handling.