QCL series ultrasonic bottle washing machineComposed of stainless steel water pump, high-pressure nozzle, electrical box, etc., it adopts high-pressure backwash spray cleaning, which can timely separate the debris on the bottle wall from falling into the water tank. It is suitable for cleaning special equipment such as glass bottles and plastic bottles, and can be used for individual or combined brushing and water washing cleaning.
Daily maintenance and upkeep:
1. Maintaining ventilation, dryness, and cleanliness in the equipment workplace is beneficial for the long-term efficient operation of the equipment and optimizing the working environment conditions;
When the cleaning solution is too dirty, it should be dealt with in a timely manner, and the dirt in the cleaning tank and storage tank should be cleaned regularly to maintain the cleanliness of the cleaning tank and its appearance, which can improve the durability of the cleaning tank;
3. Keep the electrical control box and equipment ventilation openings away from water vapor, corrosive gases, and dust, and regularly clean the attached dust with compressed air;
4. Regularly test the insulation performance of the equipment, inspect the aging electrical components regularly, check the grounding wire, and ensure that the equipment is well grounded. This project must be carried out by electricians with professional experience;
5. Regularly test the power supply to confirm that it meets the power voltage requirements of the equipment, and avoid long-term operation under unstable power sources that are too high or too low;
6. Equipment with filtering devices should have their filter cartridges replaced regularly;
7. For those with transmission mechanisms, lubricants such as butter and engine oil should be regularly added as required, and the gear oil of the reducer should be replaced regularly to ensure that the QCL series ultrasonic bottle washing machine operates under good lubrication conditions.
main points:
During the cleaning process, we need to pay attention to many places, especially strictly prohibit splashing conductive liquid (such as water) from the air inlet at the top of the ultrasonic control cabinet, otherwise it will cause serious damage to the wiring system of the cleaning machine;
2. When placing the machine, always pay attention to keeping it clean and turn off the power when not in use;
3. The QCL series ultrasonic bottle washing machine is not a collision resistant product, so it is important to avoid collisions or severe vibrations when using the machine.