The glove integrity tester adopts the pressure drop attenuation detection method, using its own inflation pump to inflate sterile operating gloves. After the internal pressure reaches the set value, it starts to maintain pressure. Within 60 seconds of maintaining pressure, the air pressure drops within the standard range, indicating that the safety gloves are well sealed. The test result is judged as: qualified; On the contrary, if the air pressure drops more than the standard range within 60 seconds of holding pressure, it is determined that there is a leak in the surrounding enclosure of the operating glove, and the test result is judged as unqualified.

The glove integrity tester has the following characteristics:

1. Portable structural design, convenient to use;

2. All stainless steel chassis, easy to clean, suitable for use in clean areas;

3. Tilted control panel for easy observation and operation;

4. The test gas is external compressed air and nitrogen;

5. Provide result printing function for easy record keeping;

6. Using SIEMENS programmable logic controller (PLC) and touch screen for control, with a friendly human-computer interaction interface;

7. Leak testing can be conducted on the sleeve gloves before or after use of the isolator;

8. Developed according to the ISO14644-7 standard.