Operation method of gynecological gel filling machine:

1. Before driving, use the joystick to rotate the machine and check for any abnormalities. Only after confirming that everything is normal can you start driving;

2. When adjusting the gel filling machine, the tools should be used properly. It is forbidden to use too large tools or force too hard to remove parts to avoid damaging the machine or affecting its performance;

3. After the adjustment of the gel filling machine is completed, tighten the loosened screws, rotate the machine with the rocker to check whether its action meets the requirements, and then start the machine;

4. The gel filling machine should be kept clean, and it is strictly prohibited to have oil stains and glass chips on the machine to avoid damage to the machine. Therefore, the glass chips should be cleaned in time during the production of the machine;

5. Before handing over the shift, each part of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department;

6. It should be thoroughly cleaned once a week, mainly by wiping off areas that are not easily accessible during normal use or blowing them clean with compressed air.

Maintenance of gynecological gel filling machine:

1. During production, it is necessary to regularly observe the operation of components, check for any abnormalities, and ensure that screws are not loose;

2. Regularly check the wire connections of the filling machine to ensure that the contact requirements meet safety standards; Normal power supply and stable voltage;

3. Do a good job in cleaning and sanitation. If the use is stopped for a long time, remove the materials inside the pipeline completely; Keep the surface of the machine clean;

4. There are certain requirements for the storage environment of the filling machine, including moderate indoor humidity, good ventilation, and a certain level of dust;

5. Add lubricating oil to the components of the machine before use, replace the lubricating oil for the gearbox motor every year, check the tightness of the chain, and adjust the tension in a timely manner.