1、 Equipment operation process
1. Turn on the power switch.
2. Press the start button to put the device into standby mode.
3. Place the bag into the bagging port located on the conveyor belt to automatically enter the equipment.
4. The device automatically opens the bag and pours out the materials inside.
5. After completing one packaging, continue to put it into the next bag. Repeat this process until all packaging tasks are completed.
6. Press the stop button to end the device operation and turn off the power switch.
2、 Equipment maintenance steps
In order to ensure the effective service life of the unpacking machine, we must regularly maintain the equipment. The following are the maintenance steps for the equipment:
1. After each operation, the equipment should be cleaned to remove any remaining materials and avoid affecting the next operation.
2. In daily use, regularly inspect all parts of the equipment to ensure that it is in normal working condition, and promptly notify maintenance personnel to handle any abnormal situations.
3. Lubricate the equipment to ensure that all parts of the equipment maintain good friction and prolong its service life.
4. Conduct safety checks on the equipment, check if all parts of the equipment are working properly, and make corresponding markings and records
3、 Safety operation standards
The unpacking machine is a very important production equipment, and some safety operation regulations need to be followed when using it:
1. Before using the equipment, it is necessary to wear work clothes, gloves, masks and other protective equipment.
2. When operating the equipment, it is necessary to follow the operation procedures, operation logs, and other requirements in a standardized manner.
3. Before using the unpacking machine, it is necessary to conduct a safety inspection of the equipment to check whether all parts are working properly to ensure safe use.
4. When the device malfunctions or experiences abnormal situations, please stop using it immediately and notify the relevant personnel for handling.
5. Unauthorized personnel are prohibited from entering the equipment usage area.
Four common faults and emergency measures
During the use of the unpacking machine, it is common to encounter some malfunctions or unexpected situations. The following are common faults and countermeasures:
1. The device is not working
(1) Check if the power supply is functioning properly
(2) Check if the control system is functioning properly
(3) Check if the sensors of the equipment are working properly
2. Sudden shutdown
(1) Confirm if the device is in an overloaded state
(2) Confirm if there are any abnormal sounds or other abnormal sounds from the device
3. The bag is stuck
(1) Confirm if the conveyor belt is running normally
(2) Check if the bag is placed correctly
(3) Check the tension of the conveyor belt