Adjustment of gap between dosage plate and sealing ring of capsule filling machine
Date: 2018-10-11Read: 0
The gap between the dose plate and the pad plate of the capsule filling machine is 0.05-0.15mm. The adjustment method is to remove the punch rod seat, powder blocking part, and sealing ring, loosen the guide screw, fix the screw, rotate the adjustment screw, and adjust it evenly with a feeler gauge. After completion, tighten the fixing screws and guide screws, and repeat the inspection again with a feeler gauge (this mechanism features a three-dimensional adjustment mechanism based on the lower plane of the dose plate, uniform gaps, stable measurement differences, high powder utilization rate, easy disassembly, cleaning, and installation, and is suitable for domestic use). After meeting the requirements, rotate the main motor shaft by hand until it rotates evenly by hand.