The capsule tablet polishing machine has the characteristics of novel mechanism, beautiful appearance, light weight, simple operation, flexible movement, easy cleaning, high polishing efficiency, and good cleanliness. All parts in contact with drugs are made of stainless steel, and the equipment hygiene conditions comply with GMP standards. So what are the usage and adjustment methods of capsule tablet polishing machine? Today, the editor will take you to understand.

Usage:

1. Connect one of the suction tubes of the industrial vacuum cleaner below the polished sealing cylinder; Connect another suction tube of the industrial vacuum cleaner above the waste collector.

2. Connect the power supply of the industrial vacuum cleaner and polishing machine, and adjust the speed of the polishing machine. Test the machine with a small amount of waste shell capsules and adjust the negative pressure air intake of the waste remover to just remove the empty shell fragments. If the negative pressure intake is too high, it may remove the good capsules, while if it is too small, it cannot have a waste removal effect. The exhaust air volume is adjusted on the regulating plate at the inlet of the industrial vacuum cleaner, and the exhaust situation can be observed from the observation plate in front of the exhaust cleaner. The air volume of the suction tube for removing medicinal powder is also adjusted on the industrial vacuum cleaner control panel.

3. After completing the above preparations, work can proceed.

4. Clean the polishing machine and industrial vacuum cleaner promptly after each shift is completed. When necessary, industrial vacuum cleaners should also be cleaned during work.

Adjustment method:

(1) Polishing machine speed regulation: organized by an electronic speed controller. For fragile capsules, the rotational speed can be appropriately low, otherwise it can be adjusted appropriately high. When used for polishing tablets, the rotational speed can be appropriately reduced.

(2) Tilt adjustment of polishing cylinder: The tilt angle is adjusted by the tail support plate. A large tilt angle has good polishing effect, while a small tilt angle has high production efficiency.

(3) Industrial vacuum cleaner adjustment: Professional industrial vacuum cleaners have two sets of dust cleaning tube devices, each with a suction air volume adjustment plate, and the air volume is adjusted according to the usage situation.