-
E-mail
qhjx998@163.com
-
Phone
15988724193
-
Address
1st Floor, 258 Dingxiang Road, Binhai Park, Wenzhou Economic and Technological Development Zone, Zhejiang Province
Wenzhou Qianhao Machinery Technology Co., Ltd
The structural principle of colloid mill equipment
Date: 2024-10-25Read: 0
Colloid mill equipment is an efficient, energy-saving, and environmentally friendly colloid mill equipment. It mainly consists of a feed inlet, a grinding disc body, a discharge outlet, a variable speed motor, an electrical control box, a feed pump, a discharge pump, a cooling water pump, and a cooling water pipe. Its working principle is to introduce the material into the grinding disc body through the feeding pipeline, and through high-speed rotation of the grinding disc and the fixed disc, it is rubbed and crushed to form very stable colloidal particles, which are discharged through the discharge port.
The colloid mill equipment mainly consists of the following parts:
1. Feed pump and discharge pump
The feed pump is mainly used to introduce materials into the grinding disc body, inject materials into the grinding disc body through the feed port, and then be crushed by friction between the grinding disc and the fixed grinding disc. The discharge pump is responsible for discharging the crushed colloidal particles.
2. Grinding disc body and grinding medium
The main body of the grinding disc and the grinding medium are the core parts of the colloid mill equipment. The disc body is the main grinding component composed of two matching disc surfaces, one of which is fixed and the other rotates. In the main body of the grinding disc, the grinding medium mainly plays the role of carrying materials, and can greatly increase the number of collisions between abrasives, improving grinding efficiency.
3. Motor and reducer
The motor and reducer are responsible for driving the high-speed rotation of the grinding disc body and controlling its grinding speed. The reducer is based on the output speed of the motor, and increases the torque through deceleration to drive the rotation of the disc. By controlling the speed and torque of the motor and reducer, the operating status of the grinding disc body can be regulated to achieve the best grinding effect.
4. Cooling water pump and cooling water pipe
The friction in the grinding disc body generates heat. To avoid overheating, the colloid equipment is equipped with a cooling water pump and cooling water pipe inside. The cooling water pump introduces water into the cooling water pipe, which flows through the main body of the grinding disc and dissipates heat to maintain the normal operation of the equipment.
Last Article: The structural principle and application of air blocker
Next Article: Structure and principle of magnetic stirrer