Dripping pill machineIt consists of a refrigeration unit, a cooling tower, a drip tank (including liquid heating, temperature control, and drip control), and an oil collection tank. This system can meet the requirements of process testing (1-pole emitter) and small-scale production (3-hole emitter) for 1-3 hole emitters; The weight of the drop pill is 5-70 milligrams; The medicine is heated in a constant temperature oil bath to avoid uneven heating of the medicine; Transparent drip pots are beneficial for observing the formation process of drip pills, facilitating teaching and scientific research; Equipped with a double-layer silicon boron high-temperature resistant glass drip tank, electrically heated with thermal oil, and then insulated with thermal oil solution, equipped with a drip head heating device. By using the dropper switch, the drip speed and liquid level can be adjusted, and the pill can be easily removed by utilizing the pressure difference. The entire dripping process is intuitive and easy to clean.

　　

The following precautions should be taken when using the drip pill machine:

　　

1. Operating instructions: Before using the drip pill equipment, one should master the working principle of the equipment according to the instructions in the manual. If you have any questions, you should consult the manufacturer in a timely manner. Do not operate the equipment if you have any questions.

　　

2. Operation precautions: First turn on the coolant pump, then turn on the refrigerator, and at the same time turn on the required heating device. When the required temperature reaches a stable value, add the dripping substance into the drip tank and adjust the gap between the cooling tower liquid level and the drip nozzle. The adjustment of gaps is the key to ensuring the quality of drip pills. After each drip, turn off the heating and cooling system first: after all the drip pills in the system have flowed out, turn off the cooling circulation system to prevent residual drip pills. After each drip, residual substances must be removed, and all pipeline containers and coolant filters that come into contact with the drip before solidification should be cleaned.

　　

3. Warning: Dripping pill machines are generally designed for pneumatic feeding or pneumatic drip dispensing. The dripping substance needs to be heated and dissolved. If the container temperature is too high, be careful of burns. The sealed container is designed with a pressure relief device. Before opening the sealed container, the pressure relief device should be turned on first, and then other operations should be carried out to avoid danger.