Desktop high-speed centrifuge is a conventional laboratory centrifuge widely used in scientific research, education, and production sectors such as biology, chemistry, and medicine. It is suitable for rapid separation and synthesis of trace samples. Today, the editor will introduce the operating procedures and maintenance methods of the desktop high-speed centrifuge:

Operating procedures for desktop high-speed centrifuge:

The worktable of the desktop high-speed centrifuge should be flat and sturdy, and the workspace should be neat, clean, dry, and well ventilated.

2. Turn on the power switch and the indicator light will turn on.

3. Turn off the power switch.

4. Open the centrifuge cover and wipe the inner cavity and rotor clean.

5. Place test tubes with consistent weighing.

6. Close the centrifuge cover.

7. Set a timer

8. Turn on the power switch

9. Adjust the speed control knob to the desired speed.

10. Before each shutdown. The speed control knob must be placed in a small position. Set the timer to zero. Turn off the power switch again.

11. Wipe the inner cavity and rotate the head. Close the centrifuge cover.

Maintenance methods for desktop high-speed centrifuges:

1. Do not place any substance on the centrifuge cover. After each use, be sure to clean the inner cavity and rotor.

If the desktop high-speed centrifuge has not been used for a long time, the centrifuge cover should be opened for a period of time before use to dry the inner cavity.

3. The carbon brush of the motor should be replaced promptly after 3000 hours of use to avoid wear on the commutator.

4. It is normal for a desktop high-speed centrifuge to experience wear and tear after long-term use.