Sorting capsule polishing machine is a specialized capsule polishing equipment with sorting function. Not only does it remove dust from the surface of the capsule to improve its smoothness and eliminate static electricity, but it also uses a novel negative pressure waste removal device to automatically remove capsules with slight filling, empty shells, fragments, and separated body caps. The sorting capsule polishing machine is widely used in the production of various types of capsules and can be connected to the fully automatic filling machine to improve the automation level of the production line.
The maintenance methods of the sorting capsule polishing machine mainly include the following aspects:
Daily cleaning:
External cleaning: Regularly wipe and clean the external surface of the machine, including the body, operation panel, and other parts, to prevent dust from entering the internal circuits or mechanical structure and affecting the normal operation of the equipment.
Internal cleaning: Use a brush and compressed air to clean the interior of the capsule sorting and polishing machine, and then wipe the outer shell with a cleaning agent. Be careful not to use cleaning agents containing corrosive components to avoid damaging the machine
Regular lubrication:
Before lubrication, clean the inside of the machine thoroughly. Then, apply an appropriate amount of engine oil to the areas that require lubrication. Be careful not to use too much engine oil to avoid affecting the operation of the machine.
Regular replacement of accessories:
Regularly replace some vulnerable parts, such as sorting wheels, polishing wheels, belts, etc. Regularly replacing these accessories based on usage frequency and machine condition can effectively extend the service life of the machine.
Precautions for safe operation:
Be careful during operation to avoid unexpected situations. Do not disassemble the equipment at will, turn off all component power before shutting down, and do not use damaged or expired capsules.
Periodic maintenance:
Replace the internal filter every six months. Clean the machine and accessories after each use, and wipe the outer and inner surfaces with a clean cloth. Regularly check the wires and power switches of the machine to ensure that the power cords and plugs are not stripped bare.