Micro porous precision filter is a device used for water treatment, which can separate impurities, suspended solids, bacteria and other small particles in water through a filter to improve water quality. This device has a compact structure, easy operation, and good filtration effect, and is one of the commonly used devices in the field of water treatment.
1、 Preparation work
Before operating the microporous precision filter, the following preparations must be made:
1. Check if the device is in normal condition and if there are any abnormal situations.
2. Prepare the filter, check if it is intact, and remove any impurities from its surface.
3. Prepare the necessary cleaning agents and tools (such as steam guns, brooms, etc.)
2、 Normal operation
Before performing normal operation of the microporous precision filter, please confirm the following operating procedures:
1. Turn on the machine power;
2. Fill the water inlet, taking care not to exceed the height of the inlet;
3. Adjust the outlet valve to ensure smooth water flow;
4. During the operation, it is necessary to regularly check the operation of the microporous precision filter, such as whether it is running normally, whether there are any abnormal sounds, and whether the water flow is stable.
3、 Cleaning and maintenance
After long-term use, the microporous precision filter will produce many pollutants, which will affect the filtration effect. Therefore, to ensure the normal use of the microporous precision filter, it is recommended to clean it regularly.
1. Disinfection and cleaning: Firstly, turn off the power of the microporous precision filter and disconnect the inlet and outlet pipelines. Clean up the debris inside the microporous precision filter, then use disinfectant for cleaning. After a certain period of time, use a steam gun to rinse the agent clean.
2. Aeration cleaning: When the microporous precision filter needs to be shut down for a long time, the pollutants in the water should be cleaned first, and then clear water should be passed into the filter. The gas valve should be opened for aeration cleaning to remove dirt and odors inside the filter.
3. Dismantling and cleaning: When there are abnormal situations with the microporous precision filter, such as unstable or weakened water flow, the microporous precision filter should be dismantled and cleaned in a timely manner to remove the dirt inside the filter.
4、 Precautions
1. The operator must be familiar with the structure, performance, and operation methods of the microporous precision filter, and monitor the microporous precision filter during work.
2. When rotating valves or performing other operations, the correct operating methods should be carried out according to the user manual or technical requirements.
3. Smoking, drinking water, and other unrelated behaviors are prohibited when operating the microporous precision filter machine.
4. Prohibit the accumulation of non-standard, hazardous, and flammable materials around the microporous precision filter machine, and maintain the cleanliness and hygiene of the work area.
5. Record the use and maintenance of the microporous precision filter, regularly inspect and replace the filter element.