Hammer crushers are widely used in industrial fields such as mining, metallurgy, construction, and chemical engineering. In order to ensure the safety and efficiency of the hammer crusher, standardized operation and regular maintenance are very important. Today, the editor will take you to understand the operating procedures of the hammer crusher for the reference of operators.
1. Equipment inspection
Before officially starting the hammer crusher, the operator must perform the following equipment checks:
(1) Check if all movable components are in normal condition, such as bearings, belts, oil pipes, etc.
(2) Check whether the appearance of the machine is intact and clean the dust and debris on the surface of the machine.
(3) Check if the device circuit and control system are functioning properly.
2. Power on operation
After the device inspection is completed, the startup operation can be performed:
(1) Turn on the power and follow the instructions on the control panel to turn on the host control button.
(2) Pay attention to whether the equipment is running smoothly. If there is any abnormal situation, the machine should be stopped immediately for inspection.
3. Run operation
During the operation of the hammer crusher, operators should pay attention to the following operating procedures:
(1) When adding materials, the feeding amount should be determined according to the specifications and performance of the equipment to avoid equipment damage caused by overload operation.
(2) Ensure the stable installation of the yellow brake and avoid vibration or severe impact.
(3) If the equipment shuts down abnormally or other abnormal situations occur, it should be shut down in a timely manner to troubleshoot the problem.
4. Shutdown operation
When the hammer crusher is not in operation, the operator should perform a shutdown operation:
(1) Stop feeding and gradually slow down to stop the machine.
(2) Turn off the host control button and cut off the power.