YUBO Vacuum Controller VC-600Suitable for laboratory vacuum measurement and control, just need to

The vacuum controller is connected to the inlet end of the vacuum pump or any other vacuum system to be monitored and controlled

The vacuum of the corresponding system can be controlled in an ideal state, and in general, the fluctuation of the vacuum value is small

At 0.5% kPa. Vacuum controllerSuitable for vacuum control of diaphragm vacuum pumps/chemical hybrid pumps and other vacuum pumps

Control the vacuum degree of the system by turning on and off the power supply of the vacuum pump. After the vacuum setting value is reached,

Automatic shutdown of the vacuum pump, using a special structural design, will not force the diaphragm vacuum pump to be strong under high vacuum

Start the vacuum pump, which can greatly extend its lifespan and is very suitable for vacuum control of rotary evaporators

It can recover over 99% of the solvent evaporated by the rotary evaporator.

*Wide measurement and control range, capable of controlling vacuum degree up to 0kpa

*Supports 5-stage programming control, which can automatically achieve the recovery of multiple solvents. Combined with a rotary evaporator, it is suitable for repeatable distillation experiments.

*The contact gas material is 316 stainless steel and PTFE spray coating, which can withstand acid, alkali, and organic solvent gases.

*Digital display, button control.

*The one click pressure relief function facilitates the installation and disassembly of the vacuum system.

*It can be connected to the pump power control and temporarily shut down the pump power after reaching a stable vacuum degree, which is energy-saving and environmentally friendly; It can also work in the normally open state of the pump.