Elevating oil-water bath pot, temperature control system adopts specifications and models; Intelligent temperature control digital display, electronic temperature control digital display, and surface display make water (oil) temperature display intuitive and accurate. The appearance is made of cold-rolled plate, the inner liner and cover plate are made of excellent stainless steel plate, which has the advantages of high temperature control accuracy, corrosion resistance, stability and reliability, and easy operation. Elevating oil-water bath pot, special specifications can be customized and modified for convenient user selection.
Maintenance method for lifting oil-water bath pot:
(1) When using, an appropriate amount of clean tap water should be added to the pot, or hot water should be added according to the required temperature to shorten the heating time.
(2) Connect the power supply and select the temperature. When equipped with an electronic thermostat, adjust the temperature knob clockwise to the desired temperature, which is the heating state and the green indicator light is on. When heated to the desired temperature, the red indicator light is on, the constant temperature state is, the large digit of the counting display is ten, the operation symbol is increment, and the operation symbol is decrement. Traffic lights change with body temperature. Similarly, a green light indicates that the heater is working, while a red light indicates constant temperature. The use of the instrument requires at least two rounds of heating and constant temperature to achieve the correct temperature accuracy (it must be fully covered and sealed).
(3) After completing the work, set the temperature control knob and the controller to the lowest value and cut off the power.
(4) When the water temperature in the pot reaches 100 ℃ and distilled with boiling water, the adjustment knob can be adjusted to the end point.
(5) Do not add too much water to prevent the water from overflowing outside the pot when boiling,
(6) The amount of water in the pot shall not be less than half, and the heating tube shall not be exposed to the water surface. Avoid burning out and causing water and electricity leakage.
(7) When using this product, the three pin socket must be effectively grounded.