The heating module is one of the commonly used hot bath equipment in the laboratory. The product uses water as a medium for temperature control experiments such as drying, concentration, distillation, and temperature control. Occasionally, I forget to turn off the device while using it. If there is sufficient water at this time and the temperature setting is not high, there will be no major problems in the short term. If the water volume is insufficient or the temperature is set too high, it is easy for the equipment to dry burn. Once the heating tube burns dry and bursts, it will cause equipment leakage.
On the basis of the original, a functional device has been added to prevent the heating tube from being damaged due to dry burning caused by the evaporation of water level. If the water bath is short of water, the strong electric part of the heating tube will automatically disconnect. At the same time, the buzzer alarm reminds users to add water or turn off the device to avoid potential hazards caused by dry burning without water.
The inner liner of the heating module is made of 304 stainless steel by one-time stretching, replacing the original product welding process, ensuring long-term use without water leakage, easy cleaning, and good corrosion resistance. Adopting stainless steel cover plate and silicone ring cover (not too hot to handle at high temperature), with concealed water outlet pipe. The four corners and bottom are designed in an arc shape, which makes it difficult to create temperature control blind spots during the heating process and affects the uniformity of water temperature. High temperature control accuracy, digital display, automatic temperature control. The instrument casing is made of cold-rolled sheet with surface spray coating, and the four corners are designed with outer arcs, which is beautiful and elegant.
Product features of heating module:
1. Special appearance design, small size, light weight, easy to move, suitable for various occasions.
2. Temperature synchronous display, set time reduction display. Built in temperature deviation calibration function.
3. Automatic fault detection and buzzer alarm function.
4. Input 24V DC power supply, built-in over temperature protection device, stable operation.
5. Multiple modules are easy to replace and facilitate cleaning and disinfection.